Decal Application Instructions

Make sure the temperature is moderate between 50f and 80f.

Mark the area with with a pencil or use tape for easy and accurate positioning.

Leaving the backing paper on, place the decal where you would like to apply it. Place a piece of tape along the top edge of the decal, creating a hinge.

Spray the surface with Rapid Tac Fluid. OR use a 32 oz spray bottle fill with water, 1/2 tsp of baby shampoo and 2 tsp of alcohol.

Remove the masking/ painters tape hinge from the top of the decal.

Wash the surface with an ammonia- free cleaner to remove any dirt, grease, oil, wax, or foreign matter.

Then spray or wipe the area with rubbing alcohol.
DO NOT USE WINDOW CLEANER.

Lift the decal, as if it is on a hinge and peel off the backing paper.

While holding the bottom edge of the decal, slowly lower the decal to the surface and use a squeegee to remove bubbles.

Use the squeegee to remove any bubbles. Allow 24 hours before washing or rough handling.